
SP2L Tomasz Stankiewicz
Posts: 3
Joined: Mar 9, 2019

|
Posted: Nov 18, 2019 07:33 PM

Msg. 1 of 4
Greetings.
I do not want do remove account. How I can temporarily disable or suspend my account?
Best regards. Tom - SP2L
SP2L Tomasz Stankiewicz
|

F6DKQ Guy FALCOZ
Posts: 963
Joined: Oct 22, 2005
Plus je m'entraine, plus j'ai de la chance
|
Posted: Nov 19, 2019 10:15 AM

Msg. 2 of 4
Hi Tomasz,
You can unsubscribe* your account, then ask us to reinstate it later on (with a copy of your licence attached) But your SILVER membership will not be suspended, the 12 month counter will keep running.. Is it what you need ?
* in your profile : eqsl.cc/QSLCard/editProfile.cfm
73, Guy F6DKQ
|

SP2L Tomasz Stankiewicz
Posts: 3
Joined: Mar 9, 2019

|
Posted: Nov 19, 2019 12:32 PM

Msg. 3 of 4
Hello Guy.
I appreciate your prompt response.
Lately I receive more and more eQSLs with __WRONG__ mode [MFSK, MFSK(MFSK8), MFSK(MFSK16) instead of MFSK(FT4), and with __WRONG__ RST reports (599 like for CW, instead of something like -06 or +12).
As of today I collected 30 such wrongly filled up eQSLs. I may send you screen shot of eQSLs in question.
It seems that on eQSL website there is no efficient mechanism (if any) to reject such useless and worthless eQSL cards.
Frankly speaking I am a bit dissapointed, particulary beacuse I do not use conventional paper QSL cards and eQSL card in some way is acceptable substitution.
Generally, if something is working properly only one way, one may say that it is not working at all.
This is the reason that I came to a conclusion that I need to do something in order to cure this situation and asked how to temporarily susped my account.
Sending messages to other parties directly from eQSL website or by regular e-mail is like writing to Santa Claus...
Finally summarising, I can only unsubscribe my account and in the future ask you to reinstate, right? Or, could you delete wrong eQSLs from your administrative account?
Best regards. Tom - SP2L
SP2L Tomasz Stankiewicz
|

F6DKQ Guy FALCOZ
Posts: 963
Joined: Oct 22, 2005
Plus je m'entraine, plus j'ai de la chance
|
Posted: Nov 19, 2019 04:08 PM

Msg. 4 of 4
100% agreed, Tom  Mass-convert all these MFSK QSO's to MFSK/FT4 ? I don't know if it's that simple There are a lot of other submodes in MFSK ? You can send a QSO as MFSK alone and maybe other submodes have been forgotten in the recent past. 599 reports ? 599 is OK in RTTY or PSK31, but in FT4/FT8 it's a bit ridiculous when your favorite software gives you a report with true (?) figures. Yes , it also gets on my nerves but I dont reject them Anyway, I put this new topic in our Advisory Board discussions 73 de Guy F6DKQ Edited by F6DKQ Guy FALCOZ on Nov 20, 2019 at 07:53 AM
|
|
|
|