 |
|
eQSL.cc Home
Search
Login
Authors
Recent Posts| Viewing User Profile for: WB5FDP Rick Mobley | |||||||||||||||||
| About | Contact | ||||||||||||||||
|
Send Private Message |
||||||||||||||||
| Post Statistics | |||||||||||||||||
|
WB5FDP Rick Mobley has contributed to 2 posts out of 11815 total posts
(0.02%) in 8,155 days (0.00 posts per day).
20 Most recent posts:
Support - English speaking »
Page Setup using IE6 Mar 4, 2007 11:32 AM
(Total replies: 3)
Vince, I use a HP4 printer with the standard MS XP supplied driver. I have tested this with other printers that use other drivers and see the same results. Could you possibly test it on your system and see if you see the same results. I can supply step by step instructions if needed. Rick WB5FDP Rick Mobley
Support - English speaking »
Page Setup using IE6 Feb 11, 2007 03:28 PM
(Total replies: 3)
This may be off topic, but I'm looking for help so where better to start than right here. I use Internet Explorer to visit eQSL and print out needed cards. I use a HP laser printer and to get the image to hit the card, I have to go into page setup and set manual feed, landscape and left margin to 5.25 inches. The problem is that after I print a card, and open up a new one I have to reset these settings again. But this is where the real problem is for me. What I see on the page setup screen is that my margin is retained, but the landscape goes back to portrait. So when I click on the portrait button, the 5.25 inches now moves to the "top" margin position. I then have to change the top back to 0.25 and change the left to 5.25 Why do I lose the page setup settings, and why does the margin swap from left to top. Help, Rick - WB5FDP WB5FDP Rick Mobley |
|||||||||||||||||