I am using Winlog 32 v6.2.6, in it I use the 'Remarks' field to put details of the QSO (i.e. "I received your signal when working ABC123)

However this info does not appear to populate the comments field in my outgoing eQSLs.

My only thought is that the string of info I am trying to input is too long.

Am I incorrect to assume that, and if so where am I going wrong?

Any guidance would be appreciated.

73 Mick

---

G-21276 Mick Worsfold

You need to use the ADIF field "QSLMSG" , see: http://www.eqsl.cc/qslcard/ADIFContentSpecs.cfm

---

73, Dave - VA3KAB

you can edit the adif file from wordpad, for istance, or from any text editor in widows, and make the proper correction.
this is the adif file generated by my logger (FastLogEntry):

<STATION_CALLSIGN:9>IT2024SWL <CALL:9>XY2WZK <BAND:3>10m <MODE:4>JT65 <QSO_DATE:8>20150210 <TIME_ON:4>1230 <RST_SENT:3>599 <RST_RCVD:3>000 <COMMENT:70>I received your signal when wkg ABC123 <EOR>

Do you see? the string "i received your signal etc..." is mentioned as: <COMMENT>
to put this string in the comment field of eQSL I open the adif file and edit it: "find" COMMENT "sobstitute all" QSLMSG

save and close, so all the "comment" in the adif file are now changed into "QSLMSG"

<STATION_CALLSIGN:9>IT2024SWL <CALL:9>XY2WZK <BAND:3>10m <MODE:4>JT65 <QSO_DATE:8>20150210 <TIME_ON:4>1230 <RST_SENT:3>599 <RST_RCVD:3>000 <QSLMSG:70>I received your signal when wkg ABC123 <EOR>


Now: when you upload the adif file to eqsl the sentence "I received your signal...bla bla" is placed in the right fill in space.

Try.

Than of course you should use a short sentence anyhow....
I use this one: "XYZ wkg ABC rpt sent NNN 73, GDXs, p.se eQSL"

---

IT2024SWL oscar marazzini
Edited by IT2024SWL oscar marazzini on Jun 5, 2015 at 10:57 AM

Thank you both for your help, much appreciated.

73 Mick

---

G-21276 Mick Worsfold